Close a period

Close a month or week so its time entries are frozen for billing, using the wizard with its advisory checklist, the start of the first period on the first close, and a typed confirmation with re-authentication.

Written for
admin
Roles
owner, admin
Requires
Owner or Admin; Browser session with a recent re-authentication
Feature
time

A period is a calendar month or a Monday-to-Sunday week in the workspace time zone, depending on the Period length setting. Closing a period freezes the work facts of every time entry in it and is the step that makes the period available to billing runs. SAQ has no timesheet submit or approve workflow; the close is the lock, and it cannot be undone.

Before you start

  • The workspace's Time and billing feature must be on; an Owner or Admin turns it on under Settings → Features. See Turn features on or off.
  • You need the Owner or Admin role.
  • Closing happens in the browser. API keys and MCP tools cannot close a period; the close_period MCP tool always refuses.
  • You confirm your identity when you send the close; a recent authentication is required at that moment.
  • Periods close in order. You cannot close a period while an earlier one is still open.
  • Check Settings → General first: Time zone and Period length are locked by the first close.

The reminder to close

Once a period has ended and is still open, Owners and Admins see a banner at the top of every page: "The period 1 to 31 August 2026 has ended and is still open. Close it under Billing → Periods." It names the oldest such period and stays until that period is closed; if several have ended, the next one takes its place. Members never see it.

Reviewed marks

Closing is workspace-wide and says nothing per person. Before that, an Owner or Admin can accept one member's time in one period under Billing → Periods: each period lists its members with the worked total and a switch, "Reviewed {n} of {count}". The same list, with the same switches, is in the first step of the close wizard, so you can review and close in one pass. A closed period shows Reviewed marks and reads its list when you open it.

Show projects, tickets, and entries under a member opens what the total is made of: the member's time in the period by project and then by ticket, with a total for each project and each ticket and a link to every ticket. Under each ticket are the entries themselves: the date, the duration, "Non-billable" where the entry is not billable, "Correction" for a correction, and the note. Time is listed under the project the entry was logged on.

The mark is advisory and never a lock: it records who reviewed, when, and the member's time at that moment. Any later change to that time puts the member back on the pre-close checklist: a new, changed, or deleted entry, an hour moved to another ticket or day, a changed note, or a changed Billable switch. The line then reads "Changed since the review (was 6h 30)", or "Changed since the review" when the total is the same as before. Switch the mark off to take it back.

The member sees the mark on their own Time page while the period is open: "The time for 1 to 30 September 2026 has been reviewed. A change made now is shown to whoever closes the period." Both are recorded in the audit log. The resource planning page shows the marks under each member.

Close the period

  1. Open Billing → Periods. Open periods show Close period; closed periods show "Period closed on {date} by {person}".
  2. Before the first close, Show periods from lets you include empty periods before the earliest logged work. Close the earliest listed period first.
  3. Select Close period on the earliest open period. The wizard has three steps on the first close and two on every later one.

Step 1: Checklist

"Review these advisory findings before closing. Nothing here blocks the close." Each item expands to the affected people or tickets.

Item Meaning
Timesheets not reviewed Counts the members whose time in the period carries no reviewed mark, or whose time changed since it was set. Opens the full member list with the switches and the breakdown; see Reviewed marks.
Below weekly target A person with Expected hours per week set under Settings → Members has a week in this period with fewer minutes than expected, shown as "{actual} of {expected}". Partial weeks are prorated by working days.
Moved or re-attributed tickets Entries whose project or billing client no longer matches the ticket, or tickets moved or re-billed after the entry was logged. Consider re-attributing.
Older work in progress Billable, unbilled entries from before this period on open tickets billed When the ticket closes.
Open deliverables using time banks Open When the ticket closes tickets in this period whose policy resolves to a time bank. The bank will only be drawn when the ticket closes.
Missing rates Billable entries in this period with no consultant category, no billing client, or no rate on the client's rate card or project override for that category and date. Fix them now or they block the billing run.

Select Next.

Step 2: Start of the first period

This step is shown on the first close only; once the date is fixed, the wizard goes from the checklist straight to the confirmation.

Start of the first period is the date time tracking in the workspace starts: nothing can be logged before it. It defaults to the period start of the earliest logged work, or to this period if that is earlier. "Time tracking in this workspace starts on this date. It is fixed when the first period is closed and cannot be changed afterwards, so it must not be later than the earliest logged time." The date must be a calendar boundary for the period length, and no time may exist before it. Afterwards it is shown under Settings → Period and run settings.

Last step: Confirm irreversible close

"This period can never be reopened. Future changes to work facts require corrections in an open period." Type the period start date (for example 2026-08-01) and select Close period. SAQ then asks you to confirm your identity with your password, a passkey, or your identity provider, and closes the period. SAQ confirms: "Period closed. Work facts are permanently frozen."

What closing does

  • The plan for the period is frozen with the time: for every member and every day, the allocated and expected minutes are written down as they stand at the close, and resource planning reads them from then on. Later changes to tickets or expected weeks do not touch a closed period. The first close also fixes Start of the first period and locks Time zone and Period length in workspace settings ("Time zone and period length are locked after the first close.").

For every entry in the period these facts are frozen: the person, the ticket, the project, the period, the work date, the start time, the time zone, the minutes, the note, and whether it is a correction. Nothing can be logged with a work date in the period, and entries cannot be moved into or out of it or deleted.

Owners and Admins can still change three things on an entry in a closed period until a run prices it: Billable, Billing client, and the consultant category. Everything else is changed by a correction in the open period.

SAQ also snapshots each entry's facts at the close, so the As of period close view in reports keeps showing the period as it was closed, whatever happens later.

Periods and billing runs

A billing run needs a closed period and runs a client's periods in order. Corrections made after a close bill in the period they are made. The run prices every entry up to the period end; there is no separate cutoff date.

There is no approval step

SAQ has no timesheet submission or approval workflow. Nobody submits a timesheet and nobody approves one. Closing the period is the lock, and only an Owner or Admin can do it. If you were asked to "approve the timesheet" for a month, what is meant is closing that period, after which the figures can no longer change except through a correction.

Before closing, the checklist in step 1 is the review step: it lists the members whose time has not been marked as reviewed, people under their weekly target, entries on tickets that moved, older work in progress, deliverables drawing on a time bank, and entries with no applicable rate. None of it blocks the close.

Common problems

Why can't I see Billing → Periods? The Billing section is shown to Owners and Admins only.

"Close the earlier periods first." An earlier period is still open. Close periods in calendar order.

"Confirm your identity to continue." The identity confirmation was cancelled or did not succeed. Select Close period again and confirm your identity.

"This operation is not available to API keys." or an MCP refusal. Period close is browser-only.

"The first period must start at a calendar boundary." Pick the first day of a month, or a Monday, depending on the period length.

"The first period would exclude logged work." Time exists before the chosen first period start. Choose an earlier boundary.

"The period is already closed." Someone else closed it while your wizard was open.